18 DJI Ronin SC

DJI Ronin SC Important information If the gimbal is experiencing drift (gimbal moves by itself without any input from the joystick), simply press the trigger button four times to begin the joystick calibration. Push and pull the joysticks in all directions several times and then press the trigger four times and hold the trigger again to complete calibration. (The LEDS will be red if failed). Press and hold the trigger button to enter locked mode. Press the trigger twice to reset the gimbal. Press the trigger three times to turn the gimbal 180 degrees. To enter sport mode, hold the M button down and then double tap the trigger to enter and stay in spot mode. Repeat the same process to get out of sport mode. https://www.d1store.com.au/

DJI Ronin SC Ronin APP You will need to activate the Ronin-SC before use. Simply download the Ronin app, enable Bluetooth on your phone and connect to the Ronin-SC with the default password being 12345678, if the password is changed, press the M button 6 times to restore the default password. In the app, there is a create button which has different settings for you to choose from. Virtual Joystick This will turn your phone into a remote and virtual joystick where you can control the max speed and smoothing of the gimbal. Max speed allows you to adjust the remote-controlled rotational speed. The smoothing allows you to control the sensitivity of the gimbal. The lower the smoothing value, the more sensitive the movement of the gimbal. ActiveTrack 3.0 ActiveTrack 3.0 is optimised for tracking human subjects with a head and shoulder model (based off deep learning algorithms, fancy). Simply mount your phone on top of the camera and start tracking. To select the subject you want to t...

DJI Ronin SC Battery The Ronin-SC has a battery that will last 11 hours, however the power adaptor for the battery is not included. It is recommended to use a 10W charger, with the specifications of 5V/2A to get the most efficient charging. When travelling on a plane ensure the battery is at 30%. Do not travel with the batteries beyond 30%. If storing the battery for long periods, ensure the battery is around 40-60%. https://www.d1store.com.au/

DJI Ronin SC Camera connections There are two included cables with the Ronin-SC, a USB-C and a Multi for Sony cameras. Simply plug the cable into the phone and then into the USB-C port on the Ronin-SC. There is an included USB-C to micro-USB adaptor to use with cameras that have a micro USB connector, such as a Canon/Panasonic and a Nikon. Half press the shutter button will auto-focus, pressing the record button will start/stop recording and holding this button down will take a photo. Balancing Maintaining proper balance is essential. This will help the Ronin-SC in critical shots where there is fast motion or acceleration and also gives the Ronin-SC a longer battery life. Please refer to this balancing video here: https://www.d1store.com.au/

DJI Ronin SC Mounting a camera Before mounting the camera to the Ronin-SC, please remove the lens cap and make sure the battery and SD card are inserted. Any change of weight will affect the balance, therefore it is important to balance your complete set-up first. There is a riser plate included for using smaller, light weight cameras, larger lenses and the focus motor. Mounting a phone When mounting a phone for ActiveTrack 3.0, please insert the phone mount onto your camera’s hot shoe mount and set-up your phone to have the phone camera as close as possible to the cameras lens. Make sure to adjust the gimbal so it is balanced before use. You might find this set-up to be a little top heavy due to the size of the phone used. ActiveTrack 3.0 can only be used in Underslung mode and Upright mode, not flashlight mode unfortunately. If mounting for Force Mobile, you will need to attach the phone to a tripod or handle bar using the included phone holder. Please be aware, force mobi...

DJI Ronin SC Motors The Ronin-SC has been tested and designed to support a maximum payload of 2.0KG. (This is the total combined weight of the camera, lens and other accessories, including the phone mounted on top if using active track 3.0). There are three switches located next to the motors that lock their respective axis. If you accidentally leave them locked and turn the Ronin-SC on, the Ronin will beep at you to remind you to unlock the motors. https://www.d1store.com.au/