DJI Ronin SC Motors

DJI Ronin SC Motors

The Ronin-SC has been tested and designed to support a maximum payload of 2.0KG. (This is the total combined weight of the camera, lens and other accessories, including the phone mounted on top if using active track 3.0).

There are three switches located next to the motors that lock their respective axis. If you accidentally leave them locked and turn the Ronin-SC on, the Ronin will beep at you to remind you to unlock the motors.

https://www.d1store.com.au/

Comments

Post a Comment

Popular posts from this blog

DJI Ronin SC FAQ App and Assistant

Image
DJI Ronin SC FAQ App and Assistant What is Auto Calibration? When Auto Calibration is enabled, the gimbal will automatically set an appropriate motor stiffness value based on the weight of the mounted payload. After finishing mounting a camera and balancing the gimbal, it is recommended that you enable Auto Calibration before filming. What is Deadband? Deadband helps regulate gimbal movement. Having a large value means that the movement range neglected by the gimbal will also be large. How do I manually adjust the gimbal direction? You can manually adjust the gimbal direction by selecting User Profile in the Ronin app and enabling Push Pan. How do I rotate the gimbal 360° while filming? By selecting User Profile in the Ronin app and enabling 3D Roll 360. How do I quickly switch between different shooting parameters? You can preset three groups of parameters for Ronin-SC and adjust them in the User Profile section of the Ronin app. By pressing the M but...
Read more

DJI Ronin SC Mounting a camera & Mounting a phone

Image
DJI Ronin SC Mounting a camera Before mounting the camera to the Ronin-SC, please remove the lens cap and make sure the battery and SD card are inserted. Any change of weight will affect the balance, therefore it is important to balance your complete set-up first. There is a riser plate included for using smaller, light weight cameras, larger lenses and the focus motor. Mounting a phone When mounting a phone for ActiveTrack 3.0, please insert the phone mount onto your camera’s hot shoe mount and set-up your phone to have the phone camera as close as possible to the cameras lens. Make sure to adjust the gimbal so it is balanced before use. You might find this set-up to be a little top heavy due to the size of the phone used. ActiveTrack 3.0 can only be used in Underslung mode and Upright mode, not flashlight mode unfortunately. If mounting for Force Mobile, you will need to attach the phone to a tripod or handle bar using the included phone holder. Please be aware, force mobi...
Read more