DJI Ronin SC FAQ App and Assistant

DJI Ronin SC FAQ

App and Assistant

What is Auto Calibration?
When Auto Calibration is enabled, the gimbal will automatically set an appropriate motor stiffness value based on the weight of the mounted payload. After finishing mounting a camera and balancing the gimbal, it is recommended that you enable Auto Calibration before filming.
What is Deadband?
Deadband helps regulate gimbal movement. Having a large value means that the movement range neglected by the gimbal will also be large.
How do I manually adjust the gimbal direction?
You can manually adjust the gimbal direction by selecting User Profile in the Ronin app and enabling Push Pan.
How do I rotate the gimbal 360° while filming?
By selecting User Profile in the Ronin app and enabling 3D Roll 360.
How do I quickly switch between different shooting parameters?
You can preset three groups of parameters for Ronin-SC and adjust them in the User Profile section of the Ronin app. By pressing the M button, you can switch between these three groups of parameters while filming.
What is System Calibration? In what situation do I need to perform a System Calibration?
Ronin-SC stabilization may be affected when filming in extreme environments. By performing a System Calibration, you can reset parameters and reduce operational errors to ensure Ronin-SC is performing at its best. Place the gimbal on a level surface before beginning System Calibration.
How do I access Pan & Till Follow, Pan Follow, FPV, and 3D Roll 360?
Launch the Ronin app, tap User Profile, and you can set gimbal parameters and choose different follow modes. In Full Follow mode, the pan and tilt axes will follow your movements, while in Pan Follow mode, only the pan axis will follow your movements. In FPV mode, the pan, tilt, and roll axes will follow your movements. In 3D Roll 360 mode, the gimbal will automatically enter Flashlight mode, allowing you to rotate it 360°.

https://www.dji.com/

Comments

Post a Comment

Popular posts from this blog

DJI Ronin SC Mounting a camera & Mounting a phone

Image
DJI Ronin SC Mounting a camera Before mounting the camera to the Ronin-SC, please remove the lens cap and make sure the battery and SD card are inserted. Any change of weight will affect the balance, therefore it is important to balance your complete set-up first. There is a riser plate included for using smaller, light weight cameras, larger lenses and the focus motor. Mounting a phone When mounting a phone for ActiveTrack 3.0, please insert the phone mount onto your camera’s hot shoe mount and set-up your phone to have the phone camera as close as possible to the cameras lens. Make sure to adjust the gimbal so it is balanced before use. You might find this set-up to be a little top heavy due to the size of the phone used. ActiveTrack 3.0 can only be used in Underslung mode and Upright mode, not flashlight mode unfortunately. If mounting for Force Mobile, you will need to attach the phone to a tripod or handle bar using the included phone holder. Please be aware, force mobi...
Read more